Home> Technology & Research

Row Edged V Belt Parts Analysls Poly V Belt Error Parts Analysls Timing Belt Error Parts Analysls

Row Edged V Belt Parts Analysls
Time:2015-03-09 22:30:26    Click:    Author:admin

1.jpg  

ERROR ATTITUDE: Snapped

REASONS:
1.Tension strength is extremely too high
2.Foreign part coming into the transmission system or other parts of this system error or not in the right position SOLUTIONS:
1.Correct the tensile strength, check the pulley parallel then change the belt
2.Remove the foreign parts and make sure the position of each part in this system is right then change the belt

1-.jpg  

ERROR ATTITUDE: Cracks
REASONS:
1.Belt tension too low or too high
2.Belt working with the too high temperature 3.Belt lifetime exceeded
SOLUTIONS:
1.Change the belt and correct the tensile strength 2.Check whether the fan function well and tight ancillary com-ponents then change the belt
3.Change a new belt

1-2.jpg

ERROR ATTITUDE: One edge worn up
REASONS:
1.The pulley not parallel, one edge worn by the flange
2.The belt have serious flapping while running
3.Pulley error
SOLUTIONS:
1.Adjust the parallel rate of the pulleys and change the belt
2.Adjust the tensile strength and change the belt
3.Change the error pilleys and belt

国产a级毛片,无码中文有码中文人妻中lao,性姿势48式真人图片,丰满的人妻hd高清 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>